“Meema” bought Scarlet this doll stroller for $1 at a garage sale.  Scarlet LOVES it, but the liner has seen better days, so I decided to create a DIY doll stroller liner tutorial.  Also, if you have a boy who likes doll strollers but not so much the pink they usually come in, this would be your chance to throw some planets or truck fabric on it.  Or make him a new pink one and tell him this isn’t 1954, real men love pink.  

Get the full DIY Doll Stroller pattern and how-to after the jump…

DIY Doll Stroller How-to

1.  Assemble your materials and pre-wash your fabric.  You’ll need 1/4 yard of fabric (i used two different fabrics equaling a quarter yard, but you can use the same on both sides, or you can make it one-sided and use even less fabric) and three yards of single-fold cotton webbing.

2.  Iron and cut your fabric.  For the top (back of the seat of your stroller) you need one piece that is a trapezoid.  It will end up 12 inches tall, 8 inches across the top, and 12 inches across the bottom.  To cut it to this shape, fold your fabric in half and using a washable fabric marker draw a 4″ line at the top.  Measure 12″ straight down from there on the fold and draw a 6″ line at the bottom. Using a ruler as a straight edge, draw a diagonal line from the end of your 4″ line to your 6″ line like so:
Cut it out.

The bottom (seat) portion is a little more tricky so I made a drawing of what it should look like:
Cut it out.  

If you are doing a two-sided cover, cut another piece of each exactly the same in the same or a different fabric.
Cut one more piece, 9″ X 2.5″ of the same fabric as the back of your stroller liner.

Cut your cotton webbing into pieces of these lengths:
2 pieces 35″ long
2 pieces 5.5″ long
2 pieces 7″ long
1 pieces 10″ long

3.  Ok, let’s start sewing.  First take your 9″X2.5″ piece and fold over one ong edge 1/4″ and iron, then another 1/4″ and iron, then sew the hem in place with a straight stitch:

Now take the bottom piece of your seat and place it right side up.  Pin this piece along the bottom with the hem to the inside, right side up and sew in place around the edges (excuse the other seam you see in my picture,  realized after the fact I did this in the wrong order, so i’m telling you the better way to do it):
Now you want to measure in 1.5″ from each edge and sew a 6″ straight line (straighter then mine, ha) in the middle.  Do it towards the top (you can do it on top of your hem if you want).  This creates the pockets that will attach the seat to the stroller:

4.  Now we will sew our backs and fronts together.  If you are doing a one-sided stroller liner you can skip this step.  Take your two pieces for the stroller back and pin them together wrong sides facing (so you see your pattern): 
and sew all the way around the edge with 1/4″ seam allowance:
Do the same thing with the two seat pieces:

5. Take two of your 5.5″ pieces of cotton webbing and make them into loops, pin one to each of the top corners on the back side of your stoller, with the loop to the inside like so:

6.  Now take one of your long pieces of cotton webbing and open it up.  You’ll notice one side is just slightly longer then the other, you want the longer side on the bottom (this will help ensure you catch it while you sew).  
Pin each of the two 7″ pieces of cotton webbing 6″ down from the top of the stroller on the front side with the length inward, under the cotton webbing trim.  Wrap the webbing around the edges of your seat and pin in place leaving the 12″ edge unfinished:

Sew it all in place with coordinating thread.

7. Now fold it in half to find the center of the bottom and mark with a pin.  Fold your seat piece in half and do the same to the rounded side:
Match your centers up and pin, with front sides facing:
Continue pinning the unfinished edge of the top to the round part of the seat without gathering it:
From the top it will look like this:
Sew that in place around the edge.

8.  Now unfold your cotton webbing and pin it around the edge you just sewed:
On the front of the seat portion, attached your 10″ piece of cotton webbing right in the middle.  I opened mine up just to be different:

Sew that in place.

9.  Now cut the plastic hardware off of your old stroller (or buy a new set if you want) and insert the webbing through one side and sew it on.  On the other side, insert the webbing and just sew the end over:

For the long piece in the middle, fold it over to make a loop and sew the end in place.  I then went back to all of these edges with some fabric glue to prevent fraying:

You’re done!  Put it on your stroller!

From the front:

From the back:

and i just realized this post is an excuse to post one of my favorite scarlet pictures ever…

Related Posts Plugin for WordPress, Blogger...
Print Friendly

About The Contributor